US Labor Department’s OSHA proposes $71,000 in fines to Atlanta-based
 BWAY Corp. for safety, health hazards at Dayton, NJ, plastics facility

DAYTON, N.J. – The U.S. Department of Labor’s Occupational Safety and Health Administration has cited BWAY Corp., headquartered in Atlanta, Ga., for three repeat, three serious and two other-than-serious safety and health violations at the company’s Dayton plastics manufacturing facility. Proposed penalties total $71,000 following an inspection initiated as part of OSHA’s National Emphasis Program on Amputations.

The repeat violations, with $60,000 in penalties, include failing to develop lockout/tagout procedures for the energy sources of specific equipment, conduct and certify monthly crane hook inspections, and protect electrical live parts with approved enclosures. A repeat violation exists when an employer previously has been cited for the same or a similar violation of a standard, regulation, rule or order at any other facility in federal enforcement states within the last five years. Similar violations were cited in 2011 at a Macon, Ga., facility.

The serious violations with $11,000 in penalties were cited for failing to address noise hazards and ensure that lockout procedures of energy sources were in place to prevent amputation hazards. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

The other-than-serious violations, with no monetary penalties, include failing to notify employees of noise sampling results and evaluate powered industrial truck operators during a three-year period. An other-than-serious violation is one that has a direct relationship to job safety and health, but probably would not cause death or serious physical harm.

“These violations put workers’ lives at risk and could cause very serious injuries or possible death,” said Patricia Jones, director of OSHA’s Avenel Area Office. “Employers are legally responsible for ensuring a safe and healthful workplace.”

BWAY Corp., which employs about 135 workers at the Dayton site, manufactures rigid metal, plastic and hybrid containers at multiple facilities throughout the U.S. The company has 15 business days from receipt of the citations to comply, ask for an informal conference with OSHA’s area director or contest the citations and proposed penalties before the independent Occupational Safety and Health Review Commission.

Any doubts that your company is compliant? Your employees safe?

The 2012 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2012.

Do you and your employees know all of the changes?
Have they been implemented into your Electrical Safety Program?
Do you have an Electrical Safety Program?
Have you had Electrical Safety Training in the last year?

If the answer to any of those questions is no, then contact Macron Safety today!

Call 916-905-6535 or contact us to be certain you are in compliance.

© 2008 - 2019 Macron Safety Inc. All Rights Reserved. A subsidiary of CamronDeen.com

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

Forgot your details?