Salisbury ILPG Series Orange Cuff Goatskin Glove Protectors should always be worn over Insulating Rubber Gloves to provide the needed mechanical protection against cuts, abrasions and punctures. The ILP Series is manufactured from top grain cowhide or goatskin. Cowhide cuffs are tough leather on palm side and orange vinyl on the back, while the goatskin cuffs are green leather on palm side and orange vinyl on back. The ILP10 gloves do not have a cuff. in dual sizes 7/7.5 through 11/11.5 and 12. Protectors for Class 00 and 0 are available with non-metallic buckle and pull strap or elastic wrist.
It is the responsibility of the purchaser to specify the overall length of the protector gloves. The Clearance Table shows the minimum distance which shall be allowed between the top of the protector glove cuff and the top end of the bead of the rubber glove per ASTM F496 Specifications.
WARNING: Do not use leather protectors alone for protection against electric shock. Serious injury or death will result. Always use proper insulating rubber gloves.
Proper care of leather protectors is essential to user safety. Inspect the leather protectors when inspecting rubber gloves. Metal particles, imbedded wire, abrasive materials or any substance that could physically damage the rubber gloves must be removed from the protector before use.
Manufactured from top grain goatskin, these protectors provide excellent protection for rubber insulating gloves at a very economical price. Goatskin cuffs are tough leather on palm side and orange vinyl on the back. Full complement of styles from 12" to 16” contour cuff. Comes in sizes 8, 9, 10, 11, 12.
|Cow||Goat||in. (mm)||Lbs. (kgs)|
|ILP3S||ILPG3S||12 (305)||1 (.5)|
|ILP5S||ILPG5S||14 (356)||1.2 (.5)|
|ILP7C||ILPG7C||16 (406)||1.5 (.7)|
|ILP10||ILPG10||10 (254)||.7 (.32)|
|ILP10A||ILPG10A||10 (254)||.7 (.32)|
|Set Product as New to Date||N/A|
|Usually Ships||3 to 5 days|
|Country of Origin||USA|
Write Your Own Review
NFPA 70E Training
Any doubts that your company is compliant? Your employees safe?
The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.
Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?
If the answer to any of those questions is no, then contact Macron Safety today!
Call 916-905-6535 or contact us to be certain you are in compliance.
Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.
Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.