Call 1 (916) 905-6535

Oberon Arc 140 cal/cm² Flash Coat & Bib-Overall Suit

Be the first to review this product

ARC140B Suit - Hazard Risk Category 4 (HRC 4) (140 cal/cm² ATPV) 30.4 oz/yd². Inherently FR Aramid Fabric, Black


The Coat & Bib-Overall style kit includes choice of size Coat & Bib-overall & Arc Flash Hood with Hard Cap.

Availability: In stock

$3,030.00

* Required Fields

Oberon

Description

Details

The ARC140B Arc Flash Suit from Oberon is designed to provide protection from Arc Flash heat exposures. The suit exceeds the requirements of NFPA 70E Hazard Risk Category 4 (HRC 4), up to 140 cal/cm². The materials used are manufactured with 57% Para-Aramid, 19% Meta-Aramid, 19% Melamine and 5% Polybenzimidazole (PBI) fiber and a layer of Kevlar.

The suit is not intended for use as a bulletproof vest. This standard is the beginning to a new era in high-level Arc protection. The window and suit tested to a V50 of 712 ft/sec with a ballistic threat using a .22" fragment, and 789 ft/sec with a .308" fragment. Only Oberon, in combination with their ArcX polycarbonate window, can now provide this level of protection for a complete suit. A propionate window cannot provide this level of impact protection.

Oberon’s ARC140B suit is Inherently Flame Resistant (FR). It will remain Flame Resistant after years of frequent and repeated laundering. ARC140 is the lightest weight Arc Flash suit in the market at this protection level. The outer surface of the shield window is scratch resistant coated to last longer. The inner surface of the shield is Anti-fog coated for clearer visibility.

The 32” Coat protects from Arc flash heat exposure and is constructed of materials that are Inherently Flame Resistant. The Bib-Overalls protect from Arc flash heat exposure and are constructed of materials that are Inherently Flame Resistant.

  • 30.4 oz/yd² fabric has an Arc Rating of 140 cal/cm² ATPV.
  • Inherently FR Aramid Blend incorporating Balistic Kevlar
  • Hazard Risk Category 4.
  • Nomex® sleeve cuffs.
  • Double front closure has flame-resistant zipper tape and a Nomex Velcro® safety flap.
  • Sewn with flame-resistant thread
  • Constructed with Flame Resistant Suspenders.
  • Expandable Pleats at the waist for adjustable fit and comfort.
  • Wide Pant Legs that are easy to slide on over work boots, equipped with Velcro cinch straps
  • Hood Arc Rating (ATPV): 140 cal/cm²
  • Lens-Visible Light Transmittal: 18%
  • Meets NFPA 70E-2009 and ASTM F-1506-02ae1.
  • Note: Personal protective equipment should be chosen to meet or exceed the expected incident energy at a specific work site.

ARC Series Clothing Features

  • All fabrics, as well as sewing thread, used in construction of ARC Series garments are inherently Flame Resistant (FR).
  • Manufactured with Oberon proprietary Aramid fabric.
  • Will remain Flame Resistant regardless of repeated laundering.
  • Lightest weight arc flash garments in the industry.
  • Help reduce heat stress.
  • All findings, Velcro®, labels, zipper tape are inherently flame resistant.
  • Meet or exceed the requirements of NFPA 70E and ASTM F1506.
  • Each protection level is color coded for quick identification.

ARCXTM Hoods

  • Manufactured with Oberon’s proprietary ARCXTM energy absorbing polycarbonate plastic.
  • Provide superior Visible Light Transmission (VLT).
  • Specially designed window for each arc level maximizes visible light transmission (VLT).
  • Scratch resistant coating on the outer surface (for longer product life).
  • Anti-fog coating on the inner surface (for improved visibility).
  • Meet NFPA 70E, ASTM F2178 and ANSI Z87.1.

Any doubts that your company is compliant? Your employees safe?

The 2012 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2012.

Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?

If the answer to any of those questions is no, then contact Macron Safety today!

Call 916-905-6535 or contact us to be certain you are in compliance.

Determine the Correct Protection Level

To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.

Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.

Additional Info

Additional Info

Model MS-IFR7B
Set Product as New to Date No
Usually Ships 2-3 weeks
Country of Origin USA
Manufacturer Warranty 1 Year
Specification
Part Number Size Style
MS-IFR7B-S Small 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap HRC 4
MS-IFR7B-M Medium 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap HRC 4
MS-IFR7B-L Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap HRC 4
MS-IFR7B-XL X-Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap HRC 4
MS-IFR7B-2XL 2X-Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap HRC 4
MS-IFR7B-3XL 3X-Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap HRC 4
MS-IFR7B-4XL 4X-Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap HRC 4
MS-IFR7B-5XL 5X-Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap HRC 4
MS-IFR7B-S+HVS Small 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap with Ventilation Fans HRC 4
MS-IFR7B-M+HVS Medium 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap with Ventilation Fans HRC 4
MS-IFR7B-L+HVS Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap with Ventilation Fans HRC 4
MS-IFR7B-XL+HVS X-Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap with Ventilation Fans HRC 4
MS-IFR7B-2XL+HVS 2X-Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap with Ventilation Fans HRC 4
MS-IFR7B-3XL+HVS 3X-Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap with Ventilation Fans HRC 4
MS-IFR7B-4XL+HVS 4X-Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap with Ventilation Fans HRC 4
MS-IFR7B-5XL+HVS 5X-Large 140 cal Coat and Bib-Overalls + Arc Flash Hood with Hard Cap with Ventilation Fans HRC 4
Manufacturer Oberon

Reviews

Write Your Own Review

You're reviewing: Oberon Arc 140 cal/cm² Flash Coat & Bib-Overall Suit

Tags

Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

NFPA 70E Training

Any doubts that your company is compliant? Your employees safe?

The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.

Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?

Electrical Safety Compliance Chart for NFPA 70E 2015

If the answer to any of those questions is no, then contact Macron Safety today!

Call 916-905-6535 or contact us to be certain you are in compliance.

Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.

Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.

You may also be interested in the following product(s)