Call 1 (916) 905-6535

Large Conductor Cleaning Brush - Sub-Station Type

Be the first to review this product

The large capacity conduit cleaner is machined from a tough weather resistant polymer. All hardware is stainless steel to provide years of trouble free service. Brush set replacement only requires a Philips screwdriver.

Availability: In stock

Macron Safety



The unique design of this conduit cleaner permits full 360 degree cleaning and remote operation with use of a shotgun stick. Simply lock the MS-USCC-004 into a shotgun stick and push the "V" throat against the conduit to open the jaws and enclose the conduit. Now place the shotgun stick in the unlocked position but keep the conduit cleaner secured within the shotgun end. This will permit the operator to provide a full 360 degree cleaning action on the conduit. Stainless steel tension springs assure agressive brush cleaning action to remove even the most stubborn oxide layer. When cleaning is completed return the shotgun stick to the locked position to secure the MS-USCC-004 and pull off the conduit. If you are serious about obtaining a solid jumper or grounding connection use of the MS-USCC-004 is mandated.

  • Product weight: 1 1/4" lb.
  • Product dimension: 17" length" x 5 1/2" width x 1 1/2" height

Replacement Conductor Cleaning Brushes

Replacement brush set only for the Large Conductor Cleaner. The replacement brush set will cover sizes ranging from 3" diameter minimum through 11" maximum. Replacement requires use of a Philips screwdriver.

  • Product weight: 5 oz.
  • Product dimension: 6.5" length x 2" width x 1/2" thickness

Additional Info

Additional Info

Model MS-USCC-005
Set Product as New to Date N/A
Usually Ships N/A
Country of Origin USA
Manufacturer Warranty N/A
Specification N/A
Manufacturer Macron Safety


Write Your Own Review

You're reviewing: Large Conductor Cleaning Brush - Sub-Station Type



Use spaces to separate tags. Use single quotes (') for phrases.

NFPA 70E Training

Any doubts that your company is compliant? Your employees safe?

The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.

Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?

Electrical Safety Compliance Chart for NFPA 70E 2015

If the answer to any of those questions is no, then contact Macron Safety today!

Call 916-905-6535 or contact us to be certain you are in compliance.

Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.

Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.