Call 1 (916) 905-6535

Hastings Distribution Sub Transmission Grounding Set

Be the first to review this product

Hastings Distribution Sub Transmission Grounding Set in four cable sizes and current ratings.

Availability: In stock


* Required Fields




  • Factory assembled and can be used on a three phase wye or delta system
  • The grounding set provides jumper lengths adequate construction and armless (narrow profile) construction
  • The grounding set includes a grounding cluster bar which enables the user to provide "single point" grounding
  • Conductor Range - ground set can be used on No. 6 solid (.16 O.D.) through 1,033 MCM ACSR (1.25 O.D.)
  • Grounding Jumpers - jumpers are assembled with bright yellow neoprene jacketed copper grounding cable. This ground cable is very flexible in cold weather.
  • Fault Current Rating - grounding sets can be ordered with proper cable size to match customers fault current needs
  • For special order configurations, contact (916) 905-6535
Item Quantity Description
A 10 21575 - Ground Clamp
B 10 Threaded Ferrule
C 1 6767 - Grounding Cluster Bar
D 1 4370 - Screw Ground Rod
E 3 Cables 6' Long
1 Cable 12' Long
1 Cable 30' Long
Yellow Jacketed Grounding Cable
F 3 13190-1 - Hanger Studs

Additional Info

Additional Info

Model MS-H-687
Set Product as New to Date No
Usually Ships 3 to 5 days
Country of Origin USA
Manufacturer Warranty No
Model Description Fault Current Rating Lbs.
6870 Groudning set with #2 cable 14,500 AMP - 15 Cycles 47
6871 Groudning set with 1/0 cable 21,000 AMPS - 15 Cycles 56
6872 Groudning set with 2/0 cable 27,000 AMPS - 15 Cycles 62
6873 Groudning set with 4/0 cable 43,000 AMPS - 15 Cycles 77
Manufacturer Hastings


Write Your Own Review

You're reviewing: Hastings Distribution Sub Transmission Grounding Set



Use spaces to separate tags. Use single quotes (') for phrases.

NFPA 70E Training

Any doubts that your company is compliant? Your employees safe?

The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.

Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?

Electrical Safety Compliance Chart for NFPA 70E 2015

If the answer to any of those questions is no, then contact Macron Safety today!

Call 916-905-6535 or contact us to be certain you are in compliance.

Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.

Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.