Call 1 (916) 905-6535

Hastings Capacitor Discharge Tool

Be the first to review this product

Hastings Capacitor Discharge Tool with 2' Fiberglass Pole and 6' Grounding Lead (Clamp Not Included)

Availability: In stock




  • The capacitor discharge tool is designed to safely drain the capacitive charge after the circuit is de-energized
  • An optional add on resistor to limit discharge current is available
  • Factory assembled to include the following components: Fiberglass Pole with hand guard, 1/4" Stainless Steel Hook with a 1 3/8" opening, Rubber Tool Holder, #2 Str. Copper Grounding Cable with safety yellow neoprene jacket, 2 hole Tin Plated Copper Lug is terminated on one end with a heat shrink sleeve
  • For Custom Build: Contact (916) 905-3565 with required clamp, length of fiberglass pole and required length of grounding cable for a part number.

Additional Info

Additional Info

Model MS-H-1004
Set Product as New to Date No
Usually Ships 3 to 5 days
Country of Origin USA
Manufacturer Warranty No
Specification No
Manufacturer Hastings


Write Your Own Review

You're reviewing: Hastings Capacitor Discharge Tool



Use spaces to separate tags. Use single quotes (') for phrases.

NFPA 70E Training

Any doubts that your company is compliant? Your employees safe?

The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.

Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?

Electrical Safety Compliance Chart for NFPA 70E 2015

If the answer to any of those questions is no, then contact Macron Safety today!

Call 916-905-6535 or contact us to be certain you are in compliance.

Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.

Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.