- Enables successful thermographic inspection of high-voltage/current electrical environments
- Minimizes inspection time/cost and reduces the chance of injuries compared to other inspection methods
- Rugged anodized aluminum frame with permanent hinged cover - no loose parts
- Broadband Calcium Fluoride (CaF2) crystal - suitable for Visual, Thermal and Fusion inspections
- Crystal insert diameter - IRW-2C: 1.97" (50mm) - IRW-3C: 2.95" (75mm) - IRW-4C: 3.74" (95mm)
- Optic Max temperature - 2474°F (1355°C)
- Doesn't affect integrity or environmental ratings of the cabinets/enclosures
- Convenient, easy to use design. PIRma-Lock™ locking ring.
- Simple 3-step installation with no screw hole drilling required. Window size matches standard knockout punch.
- Minimizes time and cost of complying with NFPA 70E requirements for electrical inspections
- Decreases risk of arc flash incidents and resultant injuries (compared with other inspection methods)
- Perform both Visual and Thermal inspections through the broadband crystal window which is compatible with all thermal cameras and UV, Visual and Fusion inspections (Fusion requires a camera with LED light feature)
- Integrity and environmental ratings of cabinets are intact even after installation
- Rugged anodized aluminum frame & cover
- Hinged cover always stays attached to base unit (minimizes risk of dropping parts around electrical cabinets)
- Windows are sized to match dimensions of standard knockout punches
- Provides approx. 30x more holding surface area securing the window to the cabinet door (vs. mounting screws)
- Mount on steel and Lexan panels
- No screw holes to drill or screws to attach
- Window labeling/ID# inside the cover
- Limited Lifetime Warranty against manufacturer defects
Anywhere from 5 to 10 arc flash accidents occur every day in the U.S., resulting in severe burn injuries that affect over 2,000 workers annually. The costs in lives, livelihoods, and liability claims can be enormous. Fortunately, new FLIR IR Windows now offer a solution to help reduce exposure so you can perform scans safely, more efficiently, and confidently that comply with NFPA 70E requirements.
- Easy Installation – Only one hole to drill and FLIR's single PIRma-Lock™ ring nut to tighten; same design as conduit connections that use standard US punch tools
- PIRma-Lock™ Reliability – Tried and true locknut technology makes FLIR's IR Windows' self-grounding locking ring an IR windows first, with teeth that bite tight to the inside of the panel
- Quick Access Hinged Cover – IR Windows' simple flip-open cover with integrated equipment ID label stays permanently attached so it never gets dropped, mismatched, or lost
- Broadband Transmission – Crystal lens supports short, mid, and longwave IR cameras, visual inspections, and fusion technology; allows FLIR cameras with integrated lamps to capture video documentation
|Set Product as New to Date||No|
|Usually Ships||3 to 7 days|
|Country of Origin||USA|
Write Your Own Review
NFPA 70E Training
Any doubts that your company is compliant? Your employees safe?
The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.
Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?
If the answer to any of those questions is no, then contact Macron Safety today!
Call 916-905-6535 or contact us to be certain you are in compliance.
Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.
Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.