Macron Safety fire entry suits are an essential safety measure for industries dealing with volatile or highly flammable materials. This suit is made with Zetex Plus high temperature material for maximum protection in total flame entry. The fire entry suit is used in industries where protection from extreme heat sources is needed, including steam and hot liquids or vapors. Fire entry suits are made for use in applications including refineries, petrochemical plants, foundries and casting plants, basic steel and aluminum industries, glass and ceramic plants, and laboratories. Each Fire Entry suit includes a hood, coat, pants, boots, mitts and heavy-duty storage trunk.
The ultimate insulated suit constructed of ZETEX PLUS® high temperature fabric for maximum protection in total flame entry.
- HOOD: Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built-in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with two tempered glass lenses, plus two gold plated lenses for thermal protection.
- COAT: Designed to be worn with a breathing apparatus. Double storm fly front. Flame seal with drawstring at coat bottom.
- PANTS: High waist design. 2-inch wide adjustable suspenders. Adjustment straps on leg bottoms.
- BOOTS: Designed to fit over work shoes. Rear entry with overlap snap closure and adjustable take-up straps. Insulated wire reinforced sole of flame resistant neoprene fiberglass riveted to boot cover. All straps and bindings are ZETEX PLUS®.
- MITTS: Heavyweight all ZETEX PLUS® construction. WEIGHT: 48 lbs (22 kg)
|Set Product as New to Date||No|
|Usually Ships||3 to 7 days|
|Country of Origin||USA|
Write Your Own Review
NFPA 70E Training
Any doubts that your company is compliant? Your employees safe?
The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.
Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?
If the answer to any of those questions is no, then contact Macron Safety today!
Call 916-905-6535 or contact us to be certain you are in compliance.
Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.
Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.