- Linesman Pliers - High leverage design and increased cutting and gripping power
- Diagonal Pliers - Heavy duty for thicker gauge wire
- Long Nose Pliers - Perfect for looping, cutting and forming wire
- Slip Joint Pliers - These pliers have milled teeth and jaws to provide positive gripping on a wide variety of objects
- Tongue & Groove Pliers - Water pump pliers available in 10" and 12" lengths. Jaw opening 2-1/4 inches, Patented undercut tongue and groove design ensures solid grip, Patented reinforced flange protects against breakage, Induction-hardened teeth remain sharp longer Drop-forged, high-carbon steel construction, Insulated
- Wire Strippers - State-of-the art wire strippers for solid or stranded wire
- Lifetime guarantee on the tool
Each manufactured hand tool is rated for exposure up to 1000VAC and dielectrically tested at 10,000VAC.
These tools meet or exceed ASTM F1505-01 and IEC 900 Standards for Insulated Hand Tools.
These tools are necessary for compliance with OSHA 1910.333 (c)(2), and NFPA 70E 2004. The insulating material used to coat the tools is impact resistant and flame retardant. Two-color insulation makes inspection easier, which adds to the overall safety of the tool. All Insulated Tools are made in the U.S.A. If the yellow under layer is showing, the tool may no longer be insulated properly, so it should be considered for replacement and removed from service.
|Set Product as New to Date||No|
|Country of Origin||USA|
Write Your Own Review
NFPA 70E Training
Any doubts that your company is compliant? Your employees safe?
The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.
Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?
If the answer to any of those questions is no, then contact Macron Safety today!
Call 916-905-6535 or contact us to be certain you are in compliance.
Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.
Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.