Call 1 (916) 905-6535

Class 1 & 2 Cowhide Leather Glove Protectors

Be the first to review this product

Voltage protectors should always be worn over rubber insulated gloves. Class 1 & 2 12" leather glove protectors are stamped with the manufactured name, along with tested specifications rating.

Availability: In stock


* Required Fields

Macron Safety



To get the utmost protection and life from gloves, leather protectors should always be worn over the rubber gloves while in use. Gloves should always be visually inspected before each use and stored in glove bags when not in use. Do not use your protectors alone.

Leather Protectors are to be used only for mechanical protection for rubber gloves and mittens and shall not be used for electrical protection per ASTM F696-02. The correct length of leather protectors is found in ASTM F496-06.

  • Glove Size: 08, 09, 10, 11, 12
  • Glove Length: 12"
  • Glove Leather Protector: Class 1 and Class 2
  • Cowhide Leather Gloves Only - Rubber Insulated Gloves sold separate.

WARNING: Do not use leather protectors alone for protection against electric shock. Serious injury or death will result. Always use a properly rated insulating glove for the voltage being worked.

Additional Info

Additional Info

Model MS-AFW-PG-12-
Set Product as New to Date N/A
Usually Ships 1 to 5 Days
Country of Origin USA
Manufacturer Warranty N/A
Specification N/A
Manufacturer Macron Safety


Write Your Own Review

You're reviewing: Class 1 & 2 Cowhide Leather Glove Protectors



Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

NFPA 70E Training

Any doubts that your company is compliant? Your employees safe?

The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.

Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?

Electrical Safety Compliance Chart for NFPA 70E 2015

If the answer to any of those questions is no, then contact Macron Safety today!

Call 916-905-6535 or contact us to be certain you are in compliance.

Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.

Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.