Call 1 (916) 905-6535

Glove Protectors For Class 0 & Class 00 Electrical Gloves

Be the first to review this product

Flame-resistant and provide needed protection against burns, cuts, abrasions and punctures. Class 00 & 0 glove protectors are made from specially-tanned goat skin for optimum dexterity and wear.

Availability: In stock


* Required Fields

Macron Safety



To get the utmost protection and life from gloves, leather protectors should always be worn over the rubber gloves while in use. Leather gloves should always be visually inspected before each use and stored in glove bags when not in use. Do not use your protectors without rubber insulated gloves.

  • Glove Size: 8, 9, 10, 11, 12
  • Glove Length: 10" or 12" Gauntlet
  • Glove Leather Protector: Class 00 and 0

Specially designed and manufactured to current ASTM F696 specifications as mechanical protection from 11" or 14" low voltage Class "0" and "00" rubber insulating gloves as described in ASTM D120. They allow the flexibility and dexterity required for secondary work operations.

Leather Protectors are to be used only for mechanical protection for rubber gloves and mittens and shall not be used for electrical protection per ASTM F696-02. The correct length of leather protectors is found in ASTM F496-06.

WARNING: Do not use leather protectors alone for protection against electric shock. Serious injury or death will result. Always use a properly rated insulating glove for the voltage being worked.

Additional Info

Additional Info

Model MS-AFW-PG-
Set Product as New to Date N/A
Usually Ships 1 to 5 Days
Country of Origin USA
Manufacturer Warranty N/A
Specification N/A
Manufacturer Macron Safety


Write Your Own Review

You're reviewing: Glove Protectors For Class 0 & Class 00 Electrical Gloves



Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

NFPA 70E Training

Any doubts that your company is compliant? Your employees safe?

The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.

Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?

Electrical Safety Compliance Chart for NFPA 70E 2015

If the answer to any of those questions is no, then contact Macron Safety today!

Call 916-905-6535 or contact us to be certain you are in compliance.

Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.

Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.