Utility Lineman Electrocuted

July 17, 2012 - Shakopee, Minnesota

A utility worker was electrocuted on Monday while working from the bucket (aka: cherry picker) of a service truck and three other workers on the ground received serious shocks.

While working from the bucket of a utility truck on a 12,000 volt overhead power line, the worker was struck by an arc flash..  While still in the bucket, the injured man who had received 3 degree burns had to be brought down by the ground crew and was rushed to a nearby hospital..

The other three workers were working on the same line in another nearby location,were also injured and treated at the hospital. At this time, two men remain hospitalized but their conditions have not been released.

OSHA  strongly recommends  Arc Flash protective clothing in order to  minimize  the  injuries sustained in the event of an arc flash.  Arc flash temperatures can reach as high as 20,000 degrees Celsius/36,000 degrees Fahrenheit. A workers clothing can be melted into his skin; while Arc Flash protective clothing is designed to negate the effects of an Arc Flash event.

Unfortunately the worker in the bucket had not worn any Arc Flash protective clothing and it was reported that a witness heard him repeatedly say,

“I should have put it on. Why didn’t I put it on?”

OHSA is leveling large fines towards companies that do not make it mandatory for their employees to wear and use protective clothing and gear.

The cause of this event is under investigation.

Friends have set up a fund to help their families pay for medical expenses.

Woodpecker’s and utility pole damage

Woodpecker’s, which have been notorious in their destructive of utility pole’s, are a protected migratory bird. The Migratory Bird Treaty Act (MBTA) protects all woodpeckers and their nests. This being said, numerous attempts have been made to “repel” woodpecker’s from their damaging effects on utility poles.

Because woodpeckers cause extensive damage in a short period of time, poles can become structurally unsound between inspections which poses a danger to lineman.

Many solutions have been tried and discarded; including but not limited to decoys, objects that move, shine, create noise, smells & odd colors. None of these work for very long because the woodpecker soon realizes that these things do not pose a threat. Barriers such as wire mesh proved to have just as many woodpecker holes as poles without the mesh. The mesh also increases pole conductivity which made it potentially more dangerous for workers. And these are only a few of the many many attempts to stop the damage from woodpeckers.

Woodpeckers will continue to damage poles resulting in millions of dollars of maintenance costs for utilities. Research leading to the development of an effective woodpecker deterrent would result in annual savings of millions of maintenance dollars for utilities.

One solution we know of that is currently successful in thwarting woodpeckers is an item called a Woodpecker Wrap. According to a lineman in the state of Oklahoma, they have woodpeckers in their area that he refers to as “Woodpeckers on Steroids”. The Woodpecker Wrap is the only successful solution they have found.

Electrical Worker Dies in On-Job Accident

Brian David Gillis, 39, of Virginia Beach died after he was electrocuted while working in the 400 block of W. Bayfront Road in Lothian.

Witnesses on scene told officials that Gillis had climbed an electrical pole with his pole-climbing gear and began work on a portion of the pole near the wires. Gillis then came into contact with a live wire. Workers began a rescue effort and brought Gillis down from the pole.

Anne Arundel County Fire Department personnel began CPR. Resuscitation efforts were eventually discontinued and Gillis was pronounced dead at the scene.

Police are treating the incident as an accident.

Is your company up to date on OSHA standards for 2012? Are your employees safety-trained according to OSHA requirements? Are you fully aware of your company’s liabilities if one of your employees is injured or killed and OSHA’s training and safety standards were not in place?

Macron Safety is your safety solutions partner. Our goal is to not only save lives; but to help you and your company avoid injuries along with massive lawsuits and fines. OSHA regulations are federally mandated; so any violation can result in massive fines and lawsuits.

Arc Flash burned over 50% of lineman’s body

A lineman was operating a scissor lift at an electrical substation when electricity arced and touched the corner of the lift. The 25 year-old apprentice lineman was badly burned over 50% of his body. The electricity traveled to the ground and back, resulting in severe burns. Without electrical safety equipment, it is speculated that the incident would have resulted in his death.  Arc flashes resulting in more than 25% body burns usually means the clothing ignited or the arc tracked through the moisture from sweat on the body.  When clothing ignites, arc rated daily wear can prevent most or all of the burns.

This lineman underwent a skin-grafting procedure on his right hand but he still suffers from burns to his face and elsewhere on his body. He also experienced swelling on his face and pneumonia as a result.

Do you have OSHA mandated training and safety implemented for your employees? Documented Safety training along with arc rated daily wear & tools could make all the difference between life and death. Not only are your employees safe; but your company is saved the financial devastation of lawsuits and fines that come from not being OSHA compliant.

Macron Safety is your safety solutions partner. Our mission is to help save lives, reduce injuries and protect companies, large and small, from being decimated by lawsuits, fines and most importantly, the loss of life.

Click here to read more about Lineman’s Rehabilitation Following Electrical Incident