- 8 Calorie Arc Flash Coverall
- High Performance Shield Kit - (Head Gear, Hard Hat, Chin Guard, Shield and Hardware), 10cal/cm2 Arc Flash Hood, Safety Glasses and Shield Bag
- Arc Flash Storage Gear Bag
- This arc flash kit meets NFPA 70E Hazard Risk Category 2
- Standard in-seem length on bibs and coveralls is 32"
- Sizes: S, M, L, XL, 2XL, 3XL, 4XL and 5XL Call for custom sizes
- Select Glove Kit (1,000v) separately to complete the Kit
TenCate Tecasafe® Plus
Arc flash can be devastating. In a fraction of a second, it generates a wave of intense radiant heat that can ignite, melt, or break open a worker's clothing, causing severe and sometimes fatal burns. PPE made from next-generation TenCate Tecasafe® Plus will minimize or prevent skin burns while providing all four categories of NFPA 70E protection.
You can count on Tecasafe Plus protecting your workers because the fabric itself is inherently flame-resistant. Its FR properties won't wash or wear out no matter how many times you wash it, or how you wash it. And thanks to its low thermal shrinkage, Tecasafe Plus continues to provide full-body protection throughout the arc flash.
In addition, Tecasafe Plus is soft and breathable, making it comfortable to wear, yet Tecasafe Plus retains its like new appearance even after continual industrial laundering. It is available in a variety of solid shades, including High-Visibility Yellow, which is ANSI 107 compliant, and Hi-Vis orange. Both are CSA Z96-2009 compliant.
Tecasafe Plus is made in the United States by TenCate Protective Fabrics USA, the largest supplier of inherently flame-resistant fabric in the world. Its long life cycle, combined with its competitive cost, makes Tecasafe Plus an exceptional value.
|Set Product as New to Date||No|
|Usually Ships||1 to 5 days|
|Country of Origin||USA|
Write Your Own Review
NFPA 70E Training
Any doubts that your company is compliant? Your employees safe?
The 2015 Edition of the NFPA 70E recommendations are in print and take effect January 1, 2015.
Do you and your employees know all of the changes? Have they been implemented into your Electrical Safety Program? Do you have an Electrical Safety Program? Have you had Electrical Safety Training in the last year?
If the answer to any of those questions is no, then contact Macron Safety today!
Call 916-905-6535 or contact us to be certain you are in compliance.
Determine the Correct Protection Level, To evaluate Fire Retardant clothing materials in order to measure the heat transferred through the fabric, two values are calculated: Arc Thermal Performance Value (ATPV)...the minimum energy causing the predicted onset of second-degree burns and Heat Attenuation Factor (HAF)...the percentage of total energy of the arc that the fabric prevents from passing through, OSHA requires that each employer must assess the potential hazards in the work environment and determine the appropriate clothing materials using ASTM PS57-97. Always do a hazard assessment. You will need to know electrical system voltage, fault current available, number of phases, Arc time duration, estimated Arc gap, minimum distance from the Arc, and Arc configuration.
Free Duke Power Heat Flux Calculator: For the purpose of calculating heat flux received at a surface some distance from an Electric Arc.